The Cloudnumbering Outbound SIP service allows you to send voice traffic from your SIP platform or switch.
The service is aimed primarily at wholesale interconnects and it is not advised to set up end users to interconnect directly with the Cloudnumbering service. A switch or PBX may be required to service the interconnect best.
Outbound Endpoint
Send calls to the FQDN:
sip.cloudnumbering.com
It is advised strongly against using the IP address directly for connecting as the IP address are subject to change. The FQDN should be used to identify the IP address closest to you for use.
Number Format
Calls should be sent with headers in E164 format.
Allowed IPs
To enable sending of outbound calls the IP address from which calls will be originated requires allowing. This can be done through the Portal or through the API. To do this add an IP address under the Account Settings in Your IPs, for further guidance see the ALlowing IPs articles.
Codecs and DTMF
Voice codecs supported:
G711ALAW
G711ULAW
DTMF support:
Out of band (RFC2833).
IP and Firewall Configuration
Cloudnumbering present the voice service from behind an FQDN. Robust firewalls will allow for configuration of the FQDN within the firewall directly and it will resolve the name when required. Other firewalls will not allow for this.
FQDN
sip.cloudnumbering.com
Current Signalling IPs
- 13.42.143.121
RTP Ports
1024 - 65534
- 188.166.149.80
- 188.166.171.119
Comments
0 comments
Article is closed for comments.